Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Millivolt, Voltage, Digital, 4-20 mA

Pressure Range: Under 4” H2O, 4” H2O to 3 psi, 3-300 psi, 300 psi & up

Kind: Board Level, Ceramic, Switch, Packaged Transducer

Let us do the work! This tool is designed to save you time by helping you find the right pressure sensor for your application.  By answering a few questions, you will receive detailed information on potential solutions for your application. Or, just pick up the phone and call us at 781-862-9572!

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Differential, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Voltage, Digital

Pressure Range: Under 4” H2O, 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

HPSD8000 is a pressure and temperature sensor for very low pressures and small spaces. Digital I²C or SPI output. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: 5V

Output Signal: Voltage, Digital

Pressure Range: Under 4” H2O, 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

HPSD3000 is a pressure sensor for 10 mbar up to 7 bar in various configurations (gauge, differential, or absolute). This sensor has an analog and a digital output!

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: 5V

Output Signal: Millivolt

Pressure Range: Under 4” H2O, 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

HPSAC3000 is a pressure sensor for 10 mbar up to 7 bar in various configurations (gauge, differential, or absolute). This sensor is temperature-compensated with a millivolt output.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Voltage, Digital

Pressure Range: Under 4” H2O, 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

The HTC52 Series is a miniature, robust pressure sensor with calibrated and temperature-compensated SPI, I²C or analog output. A variety of output configurations, including resolution, sampling rate, and output interface are available to provide a simple and ready-to-use solution for a wide range of applications. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

This ASIC sensor from Fujikura comes with a calibrated, temperature-compensated output in various pressure ranges from 0-25 kPa up to 0-1000 kPa. The most significant advantage of this part is the extremely high accuracy of 1.5% full-scale. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Differential

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The AD3 board-level differential pressure sensor is comprised of a silicon piezo-resistive pressure sensing chip and a sensor signal conditioning integrated circuit. This sensor can measure from 0-50 kPa up to 1 MPa. A compound pressure range is also available from -100 kPa to +100 kPa.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: Under 4” H2O, 4” H2O to 3 psi

Kind: Board Level

The AL4 pressure sensor is a digital output low pressure sensor. It is composed of a silicon piezoresistive pressure sensing chip and a signal conditioning integrated circuit. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage, 4-20 mA

Pressure Range: 3-300 psi, 300 psi & up

Kind: Ceramic

The new ME780 family uses a hybrid technology and Metallux's chip-on-board expertise to have signal conditioning directly integrated on top of the sensor. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi, 300 psi & up

Kind: Ceramic

The ME501/505 are piezoresistive ceramic pressure sensors. The measuring bridge is printed directly on one side of the ceramic diaphragm by means of thick film technology.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: Under 4” H2O, 4” H2O to 3 psi

Kind: Board Level

AMS6915 is a series of high precision OEM pressure sensors with a digital ^I2C interface in a compact DIL package. The series is especially suitable for low and medium differential pressure measurements in applications that require a small size.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: 3-300 psi

Kind: Board Level

The AP4/AG4 gauge pressure sensor series is composed of a silicon piezeoresistive pressure sensing chip and a signal conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature-compensated, calibrated and finally converted to digital data that is proportional with the applied pressure. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V

Output Signal: Voltage, Digital

Pressure Range: 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

The SM4XXX Series is a digital and analog, medium pressure MEMS sensor family offering state-of-the-art pressure transducer and CMOS mixed signal processing technology to produce a digital, fully-conditioned, multi-order pressure and temperature-compensated sensor in SOIC-16 package with a dual vertical porting option.

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level, Packaged Transducer

The MSS100 is a fully compensated pressure transducer ideal for medical, pharmaceutical, and bio-processing applications involving harsh liquids.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The HTS1510 Series is a surface-mountable package with both digital and analog outputs available. Its backside pressure measurement provides excellent compatibility with wet, corrosive media. It is ideal for integration on a control board.

Read more …

Properties

Sensor Type: Gauge, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Millivolt

Pressure Range: Under 4” H2O

The MPM3808 is a piezoresistive OEM pressure sensor with 316L stainless steel corrugated diaphragm and isolated oil-filled construction. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing die. The sensor outputs pressure and temperature via I²C or SPI interface.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: 5V

Output Signal: Voltage, Digital

Pressure Range: Under 4” H2O, 4” H2O to 3 psi, 3-300 psi

Kind: Packaged Transducer

The HE Series (formerly called Series 85) is a miniature and robust pressure transducer with a calibrated and temperature-compensated output. The pressure sensor is about 62 mm long with a threaded fitting and can measure as low as 2.5 mbar up to 7000 mbar.

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: 5V

Output Signal: Voltage, Digital

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

Series 89 is a miniature and robust pressure transducer with a calibrated and temperature-compensated output. Various calibrations are available from 0-1000 mbar up to 7000 mbar.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Voltage, Digital

Pressure Range: 4” H2O to 3 psi, 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The HF Series is a miniature and robust pressure transducer with a calibrated and temperature-compensated output for 100 mbar up to 50 bar. This sensor is 15 mm in diameter!

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

The AH3 gauge pressure sensor series has a smooth analog amplified and temperature-compensated output with low noise. The AH3 has a unique single point pressure threshold detection. 

Read more …

Properties

Supply Voltage: Under 5V

Output Signal: Millivolt

Pressure Range: Under 4” H2O

The MF4600 Series mass flow meters are made with Siargo's proprietary MEMS sensing technology. It applies or clean and dry gas metering and control. The meter is designed with the structure of a rotameter but with the full capability of digital gas mass flow metrology and LED display. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi, 300 psi & up

Kind: Board Level

The RS Series uncompensated packaged pressure sensor is designed for the application of a wide range of pressures to the backside of the sensing element. The RS is a flexible platform with excellent media compatibility. The technology is a piezoresistive Wheatstone bride with a chemically etched silicon diaphragm.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: 3-300 psi, 300 psi & up

Kind: Ceramic

ME900 are ready-to-use monolithic pressure transducers made with a 9 mm diameter ceramic cell mounted in a dedicated housing. This groundbreaking sensor uses the piezoresistive principle where the Wheatstone bridge is screen-printed directly on one side of the ceramic diaphragm via thick film technology. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Differential

Supply Voltage: Under 5V, 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi

Kind: Ceramic

A ceramic base plate working as a flush diaphragm using the piezoresistive principle composes the Metallux differential pressure sensors. The Wheatstone bridge is screen-printed on one side of the base plate, which is then glued to a ceramic ring to allow proper diaphragm flexing. A special coating protects the bridge, which can therefore be exposed directly to the medium being measured.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Differential

Supply Voltage: Under 5V

Output Signal: Digital

Pressure Range: Under 4” H2O

The SM9333/9336 are digital, ultra-low pressure sensors offering state-of-the-art MEMS pressure transducer technology and CMOS mixed signal processing to produce a digital, fully-conditioned, multi-order pressure and temperature-compensated sensor in JEDEC standard SOIC-16 package with a dual vertical porting option. It is available as a differential pressure sensor. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi

Kind: Ceramic

The ME910 are monolithic pressure sensors are monolithic ceramic pressure sensors. The small 9 mm size is unique, allowing for placement in small, hard-to-reach locations. Various pressure ranges up to 0-100 bar are available.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi, 300 psi & up

Kind: Ceramic

The ME600 are monolithic gauge ceramic pressure sensors using piezoresistive technology. The Wheatstone bridge is screen printed directly on one side of the ceramic diaphragm by means of thick film technology. The diaphragm's opposite side can be exposed directly to the medium being measured. 

Read more …

Metallux of Switzerland is expanding its offering of electronic manufacturing services. These state-of-the-art manufacturing and engineering services help customers get to market quickly. Reliability and flexibility allows Metallux to engineer, prototype, and produce over 4.5 million products every year.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: 5V

Pressure Range: 3-300 psi, 300 psi & up

Kind: Switch

The SKDF pressure switch is one of the smallest pressure switches in the market. With an integrated Deutch receptacle, a user can plug a mating Deutch DT06-2S plug for an instant solution to the constant water spray constant in mobile applications.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: 5V

Pressure Range: 3-300 psi, 300 psi & up

Kind: Switch

The SKBA/SKBF pressure switch series has high proof pressures ideal for harsh applications. It is a well sealed design that offers ingress protection to IP68 when paired with a mechanical flying lead option. Various ranges from 5-20 psi up to 1000-3000 psi.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: 5V

Pressure Range: 3-300 psi, 300 psi & up

Kind: Switch

The SMA and SMF pressure switch is ideal for many hydraulic and pneumatic applications. It utilizes a proven piston/diaphragm design to provide excellent accuracy and high proof pressures with zero leakage.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: 5V

Pressure Range: 3-300 psi

Kind: Switch

The SPA-SPF miniature pressure switch is a high quality snap action micro switch. It is suitable for pneumatic, water, and any low pressure hydraulic application. The switch is field adjustable with an Allen screw and now features an optional IP67 rating for any of our flying lead options ("CA" and "CS").

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Differential

Supply Voltage: 5V

Output Signal: Voltage, 4-20 mA

Pressure Range: 3-300 psi

Kind: Packaged Transducer

The ASI7000 is a media-isolated differential pressure transmitter consisting of an isolation membrane differential pressure sensor and integrated circuits. Various pressure ranges are available up to 300 psi with a common line pressure of 500 psi.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Millivolt

Pressure Range: 4” H2O to 3 psi, 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The ASI2200 pressure sensor is intended for media-isolated industrial OEM applications as low as 0-2 psi up to 0-2000 psi.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Millivolt, Voltage, 4-20 mA

Pressure Range: 4” H2O to 3 psi, 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The ASI3000 is a media isolated pressure transducer intended for general purpose OEM applications that require measurement of liquids & gases up to 2000 psi.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Millivolt, Voltage, 4-20 mA

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The ASI4000 is designed for industrial and off-road applications. It employs a p-n junction-free piezo-resistive technology that is inorganically bonded for media isolation.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The ASI200 is a pressure transducer with a miniature design that provides reliable measurement where space and weight are a concern. The main body is 1 inch long.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Digital

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The ASI2080 is a USB output pressure transducer offering high-accuracy measurements of ±0.1% FSO. It is ideal for use with laptops and data recorders for portable applications. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Voltage, Digital

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

Accepting a 3V or 5V supply, the ASI3300 is a low power pressure transducer for IIOT (Industrial Internet of Things) applications. The output signals can be I2C, 0.5 - 4.5V ratiometric, or 0.5 - 2.5V ratiometric. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Differential

Supply Voltage: Under 5V, 5V

Output Signal: Voltage, Digital

Pressure Range: 3-300 psi

Kind: Packaged Transducer

Accepting a 3V or 5V supply, the ASI7300 is a low power differential pressure transducer for IIOT (Industrial Internet of Things) applications. The output signals can be I2C, 0.5 - 4.5V ratiometric, or 0.5 - 2.5V ratiometric. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Voltage, Digital

Pressure Range: 3-300 psi

Kind: Packaged Transducer

The ASI9300 Series of submersible level pressure transmitters offer the best price-performance ratio by utilizing the latest in MEMs piezo-resistive technology using corrosion-resistant 316L stainless steel.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage, Digital, 4-20 mA

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The Model 2050 from ASI is a cryogenic & high-temperature transducer, designed to provide high-reliability low & high-temperature measurements from -320 °F to 400°F (-196 °C to 200°C ) within a rugged, all-stainless steel package.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage, Digital, 4-20 mA

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The Model 2055 Series from ASI is a family of cryogenic and high-temperature pressure transducers, offering consistent measurement accuracy in temperatures as low as -320 °F to 400°F (-196°C to 200°C). Various ranges up to 5,000 psi.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

Model ASI 2070 Aerospace Grade, low-level pressure transducer is designed to provide high-accuracy measurements of ±0.1% FSO. Flush mount non-oil-filled pressure sensor.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

Model ASI 2075 Aerospace Grade, low-level pressure transducer is designed to provide high-accuracy measurements of ±0.1% FSO in a small, compact package. Flush mount non-oil-filled pressure sensor. Up to 10,000 psi.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

Model ASI 20HT high-temperature pressure sensor measures up to 10,000 psi and an operating temperature range of -40°C to 200°C.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The ASI3100 pressure transmitter is specially designed for small and medium-sized equipment applications such as booster pumps, air compressors, and pipeline hydraulic systems. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: 5V

Output Signal: Voltage, 4-20 mA

Pressure Range: Under 4” H2O

Kind: Ceramic

The T200/T201 Series of Pressure Transducers is ideally suited for both mobile and industrial applications where space constraints require a small body size. The body is machined from a single piece of 304SS to provide added protection for the internal electronics. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage, 4-20 mA

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The ASI2010 is an aerospace-grade pressure transducer designed to provide high-accuracy pressure measurements less than ±0.25% FSO typical. ±0.1% and ±0.05% are also available. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage, 4-20 mA

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The ASI2020 is an aerospace-grade pressure transducer designed to provide high-accuracy pressure measurements between 0-5 psi up to 15,000 psi. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The ASI2100 is a monolithic OEM media-isolated pressure sensor for 0-50 psi up to 0-40,000 psi. Accuracy is less than ±0.3% FSO typical, ±0.1% available. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Differential

Supply Voltage: 5V

Output Signal: Voltage, 4-20 mA

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

The ASI2035 is a differential pressure transducer designed specifically for aerospace applications. It is highly customizable to meet specific customer requirements. Various pressure ranges from 0-1 psi up to 20,000 psi.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Differential

Supply Voltage: 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi, 300 psi & up

Kind: Packaged Transducer

ASI9050 is designed for small spaces where a flush mount design and fast response time are required. Various pressure ranges are available from 0-300 psi up to 20,000 psi. Gauge or sealed gauge pressure reference.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: 5V

Output Signal: Millivolt, Voltage, Digital, 4-20 mA

Pressure Range: 300 psi & up

Kind: Packaged Transducer

ASI40HP is a high pressure gauge sensor for up to 60,000 psi. This sensor is designed for applications requiring high accuracy and a long life.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The TVC Series is a fully compensated harsh media pressure sensor designed to handle today's toughest pressure sensing environments with temperatures between -40°C to +150°C. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: 5V

Output Signal: Millivolt, Voltage, Digital

Pressure Range: 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

The LP Series pressure sensors is a surface mountable 8 pin design available in both uncompensated and compensated output configurations. The compensated LP Series versions include both high-accuracy analog (LP1410) or digital ratiometric signal output options (LP1420) with each version having full compensation for offset, temperature and span variability. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V

Output Signal: Digital

Pressure Range: Under 4” H2O, 4” H2O to 3 psi

Kind: Board Level

The SM5XXX, SM6XXX, and SM7XXX are ultra low pressure MEMS sensor families offering state of the art pressure transducer technology and a CMOS mixed signal processing technology to produce a digital or analog, fully-conditioned, multi-order pressure and temperature-compensated sensor in JEDEC standard SOIC-16 packaging with dual ports (horizontal or vertical). 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The SMP31A Series are fully compensated high performance die in a plastic surface mount package. They are absolute pressure sensors fabricated by bonding a micromachined silicon diaphragm to Pyrex glass in a vacuum. Uniform span and offset distribution results from precise implant and etching control. The result is long-term offset stability that is suitable for barometric pressure measurement.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The MAP 36A Series has been developed specifically for manifold pressure measurement in automobile engines. These sensors are rugged, robust and fully temperature-compensated. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The STD Series model 60A is an amplified silicon MEMs piezoresistive sensor in a reliable TO-5 metal can package. The sensor is suitable for mounting directly onto a printed circuit board.  

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: Under 4” H2O, 4” H2O to 3 psi

Kind: Board Level

AMS 6916 is an OEM pressure sensors series offering an analog voltage output in a compact DIL package for assembly on printed circuit boards.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Differential, Absolute

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: 4” H2O to 3 psi

AMS3011 is a series of robust pressure transmitters in a matchbox-size IP67 metal package. This series is suitable for high precision measurements in industrial indoor and outdoor applications as well as medical instrumentation. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: 3-300 psi, 300 psi & up

Kind: Board Level

The TR Series is a fully compensated, amplified output pressure sensor for harsh media and/or liquids. The sensor combines harsh MEMS piezoresistive die with state-of-the-art pressure sensor ASIC signal management. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: Under 4” H2O, 4” H2O to 3 psi

Kind: Board Level

The FSP2000 Series of dual pressure sensors offer the unique combination of a differential and a gauge pressure sensor utilizing the MEMS thermal and piezo sensing technology with smart electronic circuitry.

Read more …

Properties

Sensor Type: Differential

Supply Voltage: Under 5V

Output Signal: Voltage, Digital

Pressure Range: Under 4” H2O

NEW!! The FSP1000 Series is an ultra low flow through differential pressure sensor with ranges from ±250 to ±500 Pa (±1.0 to ±2.0 H₂O). Highly sensitive at low differential pressure, the FSP1000 has temperature compensation with a digital I²C output or analog output with a fast response time of 5.0 msec. The sensor is fully compensated for altitude. The supply voltage is 3.0 to 3.6 V_DC. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: 5V

Output Signal: Voltage, 4-20 mA

Pressure Range: Under 4” H2O

Kind: Ceramic

Servoflo offers modified or customized pressure transducers for those requiring special features. Our strong relationships with our factories allows for the development of customized pressure transducers with relative ease. 

To start, we suggest contacting us via telephone at 781-862-9572 or filling out the information below for fast results.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Differential

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: 3-300 psi, 300 psi & up

Kind: Ceramic

ME790 and MEP790 are monolithic piezoresistive ceramic pressure sensors. The Wheatstone bridge is screen printed directly on one side of the ceramic cell by means of thick film technology and signal conditioning electronics generate 0.5 - 4.5V ratiometric output. Pressure and temperature calibration are done electronically with the on-board ASIC and can be performed in bar (ME790) or in psi (MEP790).

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute, Barometric

Supply Voltage: 5V

Output Signal: Voltage, 4-20 mA

AMS4711/4712 is a series of miniaturized pressure transmitters suitable for industrial applications and high precision measurements. These pressure transmitters are powered with 8-36 V_DC and provide an output of 0-5VDC (AMS4711) or 4-20mA (AMS4712). They are calibrated and temperature compensated in a wide temperature range of -25C to +85C.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Differential

Supply Voltage: 5V

Output Signal: Millivolt

Pressure Range: 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

AMS5612 is a series of unamplified, laser-trimmed pressure sensors with a differential, ratiometric mV output signal. They are designed for constant voltage excitation with a supply voltage up to 20 V. All AMS5612 are calibrated and temperature compensated from 0 - 60°C. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V

Output Signal: Voltage, Digital

Pressure Range: 3-300 psi

Kind: Board Level

The AP/AG pressure sensor series from Fujikura is composed of a silicon piezeoresistive pressure sensing chip and a signal conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature-compensated, calibrated and finally converted to digital data that is proportional with the applied pressure. Gauge pressure sensor. The AG version is in a surface mount package. Pressure ranges include: 25 kPa, 50 kPa, 100 kPa, 200 kPa, 500 kPa and 1 MPa. 3 models are available: AP2/AG2 with compensated analog output, AP3/AG3 analog output with threshold detection, and AP4/AG4 with a digital output.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: Under 4” H2O, 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

The MCD70D is a smart pressure sensor with an amplified digital output in I²C and OWI. Digital compensation of sensor offset, sensitivity, temperature drift and nonlinearity is accomplished in factory via an internal DSP running a correction algorithm with calibration coefficients stored in an on-chip EEPROM. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: Under 4” H2O, 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

The MCD70A is a smart pressure sensor with an amplified analog output. Digital compensation of sensor offset, sensitivity, temperature drift and nonlinearity is accomplished in factory via an internal DSP running a correction algorithm with calibration coefficients stored in an on-chip EEPROM. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V

Output Signal: Millivolt

Pressure Range: 4” H2O to 3 psi

Kind: Board Level

The MCD70 is a solid state, piezoresistive pressure sensor packaged in a ceramic substrate with SMD, DIP or SIL configuration. It is intended for low pressure applications where both low-cost and extreme long term offset stability are required. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

This new ASIC sensor from Fujikura comes with a calibrated, temperature-compensated output in various pressure ranges from 0-25 kPa up to 0-1000 kPa. The most significant advantage of this part is the extremely high accuracy of 1.5% full-scale and the ability for threshold detection.  

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Absolute, Barometric

Supply Voltage: Under 5V

Output Signal: Digital

Pressure Range: 3-300 psi, 300 psi & up

Kind: Board Level

The CPS135B-1500D is an absolute pressure sensor for low power applications. The calibration range is 500 to 15000 mbar (50 to 1500 kPa).

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Barometric

Supply Voltage: Under 5V

Output Signal: Digital

Pressure Range: 3-300 psi

Kind: Board Level

The CPS121 is an absolute pressure sensor solution with a fully-calibrated pressure and temperature-compensated digital output for pressure ranges from 300-1200 mbar (30-120 kPa). Excellent accuracy of ±1.7 mbar and an operating supply voltage range 2.3V to 5.5V targets battery and other low-power applications.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Differential, Absolute, Barometric

Supply Voltage: Under 5V

Output Signal: Digital

Pressure Range: Under 4” H2O, 3-300 psi

Kind: Board Level

AMS5935 is a digital 18 bit board-mount pressure sensor designed for high precision measurements in ultra-low and low pressure ranges.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Differential, Absolute, Barometric

Supply Voltage: Under 5V

Output Signal: Digital

Pressure Range: Under 4” H2O, 3-300 psi

Kind: Board Level

AMS5915 is calibrated and compensated for a wide temperature range of -25 to +85 C. A very low power supply of 3.0 to 3.6 V is used.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Differential, Absolute, Barometric

Supply Voltage: 5V

Output Signal: Voltage, 4-20 mA

Pressure Range: Under 4” H2O, 4” H2O to 3 psi

Kind: Board Level

AMS5105 Series combines high precision OEM pressure sensors with programmable pressure switches in one package. AMS5105 has an analog voltage output and two independent logic switching outputs. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi

Kind: Board Level

Using a high quality silicon MEMs pressure sensor as the sensing element, the SMP31 uses a vent hold for the pressure interface, resulting in a low profile. The aim of the SMP31 is to allow customers to integrate an absolute pressure sensor into their systems at costs close to that of bare pressure die. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

Using a high quality silicon MEMs pressure sensor as the sensing element, the SPD34 Series delivers an excellent value when a gauge pressure sensor is required. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: 3-300 psi

Kind: Board Level

Using a high quality silicon MEMs pressure sensor as the sensing element, the SPD34 Series delivers an excellent value when a gauge pressure sensor is required. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi

Kind: Board Level

The STD60 Series are uncompensated pressure sensors. The Series feature a metal can (TO-5) package with an optional port to provide the pressure connection.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi

Kind: Board Level

Using a high-quality silicon MEMs pressure sensor as the sensing element, the 5 psi version is widely used in blood pressure and air mattress pressure measurement where a low-cost pressure sensor is critical. For higher pressures, 15 psi and 100 psi versions are also available. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 4” H2O to 3 psi

Kind: Board Level

The CCD 53 Series are fully compensated and amplified pressure sensors. Featuring a rigid ceramic substrate, the CCD 53 Series delivers excellent thermal and long term stability. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The CCD 53 Series are fully compensated and amplified pressure sensors. Featuring a rigid ceramic substrate, the CCD 53 Series delivers excellent thermal and long term stability. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V

Output Signal: Digital

Pressure Range: 4” H2O to 3 psi

Kind: Board Level

The CCD 53 Series are fully compensated and amplified pressure sensors. Featuring a rigid ceramic substrate, the CCD 53 Series delivers excellent thermal and long term stability. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: 3-300 psi

Kind: Board Level

The CCD 53 Series are fully compensated and amplified pressure sensors. Featuring a rigid ceramic substrate, the CCD 53 Series delivers excellent thermal and long term stability. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The CCD 54 Series are fully compensated and amplified pressure sensors. Featuring a rigid ceramic substrate, the CCD 54 Series delivers excellent thermal and long term stability. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The CCD 54 Series are fully compensated and amplified pressure sensors. Featuring a rigid ceramic substrate, the CCD 54 Series delivers excellent thermal and long term stability. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: 4” H2O to 3 psi

Kind: Board Level

The CCD 54 Series are fully compensated and amplified pressure sensors. Featuring a rigid ceramic substrate, the CCD 54 Series delivers excellent thermal and long term stability.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: 3-300 psi

Kind: Board Level

The CCD 54 Series are fully compensated and amplified pressure sensors. Featuring a rigid ceramic substrate, the CCD 54 Series delivers excellent thermal and long term stability. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 4” H2O to 3 psi

Kind: Board Level

The CCD 55 Series is a smart pressure sensor with a calibrated and amplified analog output. The series features a flat surface ideal for interfacing to a manifold and sealing by o-rings. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The CCD 55 Series is a smart pressure sensor with a calibrated and amplified analog output. The series features a flat surface ideal for interfacing to a manifold and sealing by o-rings. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 4” H2O to 3 psi

Kind: Board Level

The MAP 36 Series are fully compensated and amplified pressure sensors. The series can be ordered with a variety of port options. The series is an ideal manifold absolute pressure sensor or MAP sensor. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The MAP 36 Series are fully compensated and amplified pressure sensors. The series can be ordered with a variety of port options. The series is an ideal manifold absolute pressure sensor or MAP sensor. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The MAP 36 Series are fully compensated and amplified pressure sensors. The series can be ordered with a variety of port options. The series is an ideal manifold absolute pressure sensor or MAP sensor. Based on Sensormate's proprietary sensor platform, the MAP 36 Series incorporates a silicon MEMs pressure sensor with the latest ASIC technology. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: 4” H2O to 3 psi

Kind: Board Level

The MAP 36 Series are fully compensated and amplified pressure sensors. The series can be ordered with a variety of port options. The series is an ideal manifold absolute pressure sensor or MAP sensor. Based on Sensormate's proprietary sensor platform, the MAP 36 Series incorporates a silicon MEMs pressure sensor with the latest ASIC technology.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: 3-300 psi

Kind: Board Level

The MAP 36 Series are fully compensated and amplified pressure sensors. The series can be ordered with a variety of port options. The series is an ideal manifold absolute pressure sensor or MAP sensor. Based on Sensormate's proprietary sensor platform, the MAP 36 Series incorporates a silicon MEMs pressure sensor with the latest ASIC technology. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Absolute

Supply Voltage: Under 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi

Kind: Board Level

Using a high quality silicon MEMs pressure sensor as the sensing element, the SCD Series provides a compact footprint for the tightest space requirements. It is particularly well-suited for high volume OEM applications that require the flexibility of either gauge or absolute pressure sensors. The SCD51 Series can be specified with pressure ranges from 5-100 psi.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 4” H2O to 3 psi

Kind: Board Level

The SLP33A-LP Series are fully compensated, amplified gauge pressure sensors with a pressure port. Ordering options include negative pressure or bi-directional pressure ranges. The SLP33 Series incorporates a silicon MEMs pressure sensor with the latest ASIC technology. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The SLP33A-STD Series are fully compensated, amplified gauge pressure sensors with a pressure port for 5-100 psi. Ordering options include negative pressure or bi-directional pressure ranges. The SLP33 Series incorporates a silicon MEMs pressure sensor with the latest ASIC technology. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: 4” H2O to 3 psi

Kind: Board Level

The SLP33D-LP Series are fully compensated, amplified gauge pressure sensors with a pressure port. Ordering options include negative pressure or bi-directional pressure ranges. This model has a digital output. The SLP33 Series incorporates a silicon MEMs pressure sensor with the latest ASIC technology. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: 4” H2O to 3 psi

Kind: Board Level

The SLP33D-STD Series are fully compensated, amplified gauge pressure sensors with a pressure port for 5-100 psi. Ordering options include negative pressure or bi-directional pressure ranges. The SLP33 Series incorporates a silicon MEMs pressure sensor with the latest ASIC technology. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 4” H2O to 3 psi

Kind: Board Level

The SLP 35 Series are fully compensated and amplified pressure sensors. With a small footprint of 10 mm x 10.2 mm x 10 mm, these are one of the smallest available dual port pressure sensors. Applications include HVAC controllers, medical or flow instruments and pneumatics. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

The SLP 35 Series are fully compensated and amplified pressure sensors. With a small footprint of 10 mm x 10.2 mm x 10 mm, these are one of the smallest available dual port pressure sensors. Applications include HVAC controllers, medical or flow instruments and pneumatics.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: 4” H2O to 3 psi

Kind: Board Level

The SLP 35 Series are fully compensated and amplified pressure sensors. With a small footprint of 10 mm x 10.2 mm x 10 mm, these are one of the smallest available dual port pressure sensors. Applications include HVAC controllers, medical or flow instruments and pneumatics.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge, Differential

Supply Voltage: Under 5V, 5V

Output Signal: Digital

Pressure Range: 3-300 psi

Kind: Board Level

The SLP 35 Series are fully compensated and amplified pressure sensors. With a small footprint of 10 mm x 10.2 mm x 10 mm, these are one of the smallest available dual port pressure sensors. Applications include HVAC controllers, medical or flow instruments and pneumatics.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage, 4-20 mA

Pressure Range: 3-300 psi, 300 psi & up

Kind: Ceramic

ME77X are two-piece piezoresistive ceramic pressure sensors with three different output signal options: ratiometric 0.5-4.5V, non-ratiometric 0-10V or 4-20 mA. 

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: 5V

Output Signal: Voltage

Pressure Range: 3-300 psi, 300 psi & up

Kind: Ceramic

ME75X are monolithic piezoresistive ceramic pressure sensors with three different output signal options: ratiometric 0.5-4.5V, non-ratiometric 0-10V or 4-20 mA.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi

Kind: Ceramic

The ME506 is a piezo resistive ceramic pressure sensor. The ME506 is available for absolute- and gauge pressure measurement.

Read more …

Properties

Pressure Medium: Air/Gas, Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi

Kind: Ceramic

The ME509 is a piezo resistive ceramic pressure sensor specially designed for level measurement applications. The rear side of the flat diaphragm can be exposed directly to the medium without any additional protection due to the excellent chemical resistivity of the ceramic. 

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: Under 5V, 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi, 300 psi & up

Kind: Ceramic

The ME550 is a ceramic capacitive pressure sensor specially designed for harsh applications. Various calibration ranges are availabe from 60-20,000 mbar.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V

Output Signal: Millivolt

Pressure Range: 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

FPM (Gauge) Package (8 mm tube length), best used with silicon tubing or directly attached to manifold.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Absolute

Supply Voltage: Under 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi

Kind: Board Level

FAM, absolute pressure, surface mount package or termain leads

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Differential

Supply Voltage: Under 5V

Output Signal: Millivolt

Pressure Range: 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

FDM pressure sensor is a differential pressure sensor with a millivolt uncalibrated output for various pressure ranges. Surface-mount package. Various pressure ranges are available from 2 psi up to 120 psi.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V

Output Signal: Millivolt

Pressure Range: 4” H2O to 3 psi, 300 psi & up

Kind: Board Level

FGM-3 Surface Mount Package (3 mm tube length), best used directly attached to manifold and sealed with an O Ring.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi

Kind: Board Level

FHM is a gauge pressure sensor with a horizontal side port for use with silicon tubing or to directly attach to a manifold. Various calibration ranges are available from 2 psi up to 120 psi. The FHM has a millivolt unamplifed output.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Absolute

Supply Voltage: Under 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi

Kind: Board Level

FPBS Series Absolute Pressure With mV Output

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Absolute

Supply Voltage: Under 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi

Kind: Board Level

FPM (Absolute) Package (8 mm tube length), best used with silicon tubing or directly attached to manifold. Also available as FAM surface mount sensors (no port); please ask!

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V

Output Signal: Millivolt

Pressure Range: 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

FPN/FGN (Gauge) Package (8 mm tube length) with millivolt uncalibrated output. Best used with silicon tubing or directly attached to manifold.

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Gauge

Supply Voltage: Under 5V, 5V

Output Signal: Voltage

Pressure Range: 3-300 psi

Kind: Board Level

Servoflo and Fujikura are pleased to offer pressure sensors specifically designed for non-invasive blood pressure measurement. These sensors are specially calibrated AP3/AG3 models.

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: 5V

Output Signal: 4-20 mA

Pressure Range: 300 psi & up

MPM416 measure liquid static pressure accurately which is positively proportional to liquid depth, transmitting a pressure signal into a standard current/voltage output signal by amplifier circuit board. 

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Gauge

Supply Voltage: 5V

Output Signal: Voltage, 4-20 mA

Pressure Range: 4” H2O to 3 psi, 3-300 psi

The MPM426 & MPM436 use high performance liquid pressure sensors as sensing elements that measure liquid static pressure that is positively proportional to level depth and transform pressure signals into standard current/voltage output signals by an amplifier circuit to measure depth level accurately.

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Gauge

Output Signal: Digital, 4-20 mA

Pressure Range: 4” H2O to 3 psi, 3-300 psi

The MPM4700 liquid level measurement sensor has full stainless steel construction and full-sealed submersible pressure transmitter with high accuracy. 

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Differential

Supply Voltage: 5V

Output Signal: Millivolt, Voltage, 4-20 mA

Pressure Range: 3-300 psi, 300 psi & up

The MDM490 uses a piezoresistive differential pressure sensor as its sensing element. Silicon oil is filled in between die and two diaphragms. 

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Differential

Supply Voltage: 5V

Output Signal: 4-20 mA

Pressure Range: 4” H2O to 3 psi

The MDM492 is a low differential pressure transmitter with a high performance sensor and amplifier circuit. The output is a 4-20mA current signal.

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Digital, 4-20 mA

Pressure Range: 300 psi & up

The MPM4730 pressure transmitter is a highly accurate and stable, intelligent pressure transmitter. It uses digital temperature compensation, non-linearity correction techniques, and advanced transmitter production processes. 

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Voltage, 4-20 mA

Pressure Range: 3-300 psi, 300 psi & up

The MPM480 pressure transmitter uses a piezoresistive OEM pressure sensor with an isolated stainless steel diaphragm as its signal sensing element. 

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Differential

Supply Voltage: 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi, 300 psi & up

MDM290 is a piezoresistive differential pressure sensor with a stainless steel isolated diaphragm. Accepting a high static pressure, the MDM290 is stable and reliable. 

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi, 300 psi & up

Various versions of the general MPM280 are available:

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi, 300 psi & up

MPM281 is a highly stable OEM piezoresistive pressure sensor with precise compensation. It uses highly stable silicon die, with an outer diameter of 29mm 316L stainless steel housing.

Read more …

Properties

Pressure Medium: Harsh & Liquid Environments

Sensor Type: Gauge, Absolute

Supply Voltage: 5V

Output Signal: Millivolt

Pressure Range: 3-300 psi, 300 psi & up

MPM283 piezoresistive pressure sensor is an OEM pressure sensor with a stainless steel isolated diaphragm. With integrated construction, high endurance, stability and reliability, the MPM283 is used specifically for middle to high pressure measurement. 

Read more …

Properties

Pressure Medium: Air/Gas

Sensor Type: Differential, Absolute

Supply Voltage: 5V

Output Signal: Voltage, Digital

Pressure Range: 4” H2O to 3 psi, 3-300 psi

Kind: Board Level

AMS5812 pressure sensors are a series of high-precision OEM sensors with an analog 0.5-4.5 V output and a digital I²C interface.  

Read more …

Servoflo is pleased to announce a new customer case study. Hickok Incorporated is using the Fujikura AP Series in its EVAP Leak Tester, a portable system designed specifically for measuring and reporting leaks in automobile evaporative emissions systems. 

Read more …