Blood Pressure Measurement
-
Fujikura Optimized sensors for non-invasive blood pressure monitoring
-
CCD54A-STD sensors come with a calibrated analog output for pressure measurement of 5-150 psi. Input of 2.7 to 5.5V. 8 pin ceramic dip, differential or gauge models. Absolute models available over 15 psi. Low profile package of less than 9 mm, forward facing ports.
-
The SM5882 is fully compensated and amplified for 0 - .6 PSI to 0 - 1.5 PSI applications. Analog and digital pressure output with access to temperature measurement. Available for differential pressure, gauge pressure and single-ended applications. NEW!!!
Package:
SMD mountable
-
0-300 psi pressure sensors with temperature compensation and millivolt output. MS4425 has 2 ports, MS4426 has 1 port.
-
XFPM/XFGM PI pressure sensor is optimized for blood pressure measurement. Calibrated 0-300 mmHg, XFPM has DIP package, XFGM has surface-mount package, signal conditioned analog output.
-
P3 Series optimized for cuff blood pressure measurement
-
SLP33A-STD sensors come with a calibrated voltage output for pressure measurement of 5-100 psi. Input of 2.7 to 5.5V. Gauge pressure sensor. See SLP33A-LP for lower pressure ranges.
-
SM5420 absolute pressure sensor has a millivolt output and various pressure ranges from 0-15 psi up to 0-100 psi. Ultra small SO-8 package. Low cost - approximately $1 in quantities of 25,000!
Package:
SOIC-16
-
Gauge, high pressure, dual-in-line 3 mm or 6 mm pressure port, 5V supply, calibrated voltage output. Excellent for overpressure alarm.
-
Gauge, high pressure, dual-in-line (XFGM) or horizontal pressure port (XFHM), 5V supply, calibrated voltage output. Excellent for overpressure alarm.