Liquid Level Sensors

Liquid Level Sensors

Liquid level sensing is done in many areas such as wastewater treatment, water level monitoring in holding ponds, rivers and consumer equipment and much more. Sensors can be incorporated into instrumentation for testing or for installation in long term liquid level monitoring systems.

Ceramic Differential Pressure Sensor Flush Diaphragm ME800

Ceramic Differential Pressure Sensor Flush Diaphragm ME800

Properties
Pressure Medium: Air/Gas, Harsh & Liquid Environments
Sensor Type: Differential
Supply Voltage: Under 5V, 5V
Output Signal: Millivolt
Pressure Range: 3-300 psi
Kind: Ceramic

A ceramic base plate working as a flush diaphragm using the piezoresistive principle composes the Metallux differential pressure sensors. The Wheatstone bridge is screen-printed on one side of the base plate, which is then glued to a ceramic ring to allow proper diaphragm flexing. A special coating protects the bridge, which can therefore be exposed directly to the medium being measured.

Read more
Ceramic Pressure Transducer ME780 Series

Ceramic Pressure Transducer ME780 Series

Properties
Pressure Medium: Air/Gas, Harsh & Liquid Environments
Sensor Type: Gauge, Absolute
Supply Voltage: 5V
Output Signal: Voltage, 4-20 mA
Pressure Range: 3-300 psi, 300 psi & up
Kind: Ceramic

The new ME780 family uses a hybrid technology and Metallux's chip-on-board expertise to have signal conditioning directly integrated on top of the sensor. 

Read more
ESCP-MIS1 Capacitive Pressure Sensor Capsule Package

ESCP-MIS1 Capacitive Pressure Sensor Capsule Package

Properties
Pressure Medium: Harsh & Liquid Environments
Sensor Type: Absolute
Supply Voltage: Under 5V, 5V
Output Signal: Voltage, Digital
Pressure Range: 3-300 psi, 300 psi & up

ES Systems has developed a series of capacitive pressure sensor transducers for absolute pressure measurements. Each module integrates an oil-filled pressure capsule equipped with a medium isolation diaphragm that protects the MEMS capacitive pressure sensor die. 

Read more
HTS Series Harsh Media Pressure Sensor for 1 psi to 100 psi

HTS1510 Series Harsh Media Pressure Sensor for 1 psi to 100 psi

Properties
Pressure Medium: Air/Gas, Harsh & Liquid Environments
Sensor Type: Gauge, Absolute
Supply Voltage: 5V
Output Signal: Voltage
Pressure Range: 3-300 psi
Kind: Board Level

The HTS1510 Series is a surface-mountable package with both digital and analog outputs available. Its backside pressure measurement provides excellent compatibility with wet, corrosive media. It is ideal for integration on a control board.

Read more
ME900 - 9 mm Ceramic Pressure Sensor

ME900 - 9 mm Ceramic Pressure Sensor

Properties
Pressure Medium: Air/Gas, Harsh & Liquid Environments
Sensor Type: Gauge
Supply Voltage: 5V
Output Signal: Voltage
Pressure Range: 3-300 psi, 300 psi & up
Kind: Ceramic

ME900 are ready to use monolithic pressure transducers made with a 9 mm diameter ceramic cell mounted in a dedicated housing. This groundbreaking sensor uses the piezoresistive principle where the Wheatstone bridge is screen-printed directly on one side of the ceramic diaphragm via thick film technology. 

Read more
Monolithic Ceramic Pressure Sensor With Signal Conditioning ME790 Series

Monolithic Ceramic Pressure Sensor With Signal Conditioning ME790 Series

Properties
Pressure Medium: Air/Gas, Harsh & Liquid Environments
Sensor Type: Differential
Supply Voltage: 5V
Output Signal: Voltage
Pressure Range: 3-300 psi, 300 psi & up
Kind: Ceramic

ME790 and MEP790 are monolithic piezoresistive ceramic pressure sensors. The Wheatstone bridge is screen printed directly on one side of the ceramic cell by means of thick film technology and signal conditioning electronics generate 0.5 - 4.5V ratiometric output. Pressure and temperature calibration are done electronically with the on-board ASIC and can be performed in bar (ME790) or in psi (MEP790).

Read more
MPM416 Level Measurement Sensor

MPM416 Level Measurement Sensor

Properties
Pressure Medium: Harsh & Liquid Environments
Sensor Type: Gauge
Supply Voltage: 5V
Output Signal: 4-20 mA
Pressure Range: 300 psi & up

MPM416 measure liquid static pressure accurately which is positively proportional to liquid depth, transmitting a pressure signal into a standard current/voltage output signal by amplifier circuit board. 

Read more
MPM426-436 Level Measurement Sensor

MPM426-436 Level Measurement Sensor

Properties
Pressure Medium: Harsh & Liquid Environments
Sensor Type: Gauge
Supply Voltage: 5V
Output Signal: Voltage, 4-20 mA
Pressure Range: 4” H2O to 3 psi, 3-300 psi

The MPM426 & MPM436 use high performance liquid pressure sensors as sensing elements that measure liquid static pressure that is positively proportional to level depth and transform pressure signals into standard current/voltage output signals by an amplifier circuit to measure depth level accurately.

Read more
MPM4700 Liquid Level Measurement Sensor

MPM4700 Liquid Level Measurement Sensor

Properties
Pressure Medium: Harsh & Liquid Environments
Sensor Type: Gauge
Output Signal: Digital, 4-20 mA
Pressure Range: 4” H2O to 3 psi, 3-300 psi

The MPM4700 liquid level measurement sensor has full stainless steel construction and full-sealed submersible pressure transmitter with high accuracy. 

Read more
RS Series Uncompensated Harsh Media Pressure Sensor for 0 - 500 psi

RS Series Uncompensated Harsh Media Pressure Sensor for 0 - 500 psi

Properties
Pressure Medium: Air/Gas
Sensor Type: Gauge, Absolute
Supply Voltage: 5V
Output Signal: Millivolt
Pressure Range: 3-300 psi, 300 psi & up
Kind: Board Level

The RS Series uncompensated packaged pressure sensor is designed for the application of a wide range of pressures to the backside of the sensing element. The RS is a flexible platform with excellent media compatibility. The technology is a piezoresistive Wheatstone bride with a chemically etched silicon diaphragm.

Read more
TR Series Harsh Media / Liquid Pressure Sensor

TR Series Harsh Media / Liquid Pressure Sensor

Properties
Pressure Medium: Air/Gas, Harsh & Liquid Environments
Sensor Type: Gauge, Absolute
Supply Voltage: 5V
Output Signal: Voltage
Pressure Range: 3-300 psi, 300 psi & up
Kind: Board Level

The TR Series is a fully compensated, amplified output pressure sensor for harsh media and/or liquids. The sensor combines harsh MEMS piezoresistive die with state-of-the-art pressure sensor ASIC signal management. 

Read more
TVC Series Harsh Media Pressure Sensor for 15 psi to 300 psi

TVC Series Harsh Media Pressure Sensor for 15 psi to 300 psi

Properties
Pressure Medium: Air/Gas
Sensor Type: Gauge, Absolute
Supply Voltage: 5V
Output Signal: Voltage
Pressure Range: 3-300 psi
Kind: Board Level

The TVC Series is a fully compensated harsh media pressure sensor deigned to handle today's toughest pressure sensing environments with temperatures between -40°C to +150°C. 

Read more