TCS Micropumps

D200 Series Miniature Pump for Air or Liquid

D200 Series Miniature Pump for Air or Liquid

The D200 Series pumps are constructed from glass-filled nylon or aluminum alloy 6000 (anondized) with stainless steel tubing connectors. It is fitted with Nitrile + Silicone diaphragm as standard but also has alternative wetted part options. Materials are available enabling this pump range to resist most chemicals and solvents. The pump uses efficient push-fit connectors designed for 2.4 mm bore flexible tubing.

Read more
D3K 0-3.6 LPM Miniature Diaphragm Air/Gas Pump

D3K 0-3.6 LPM Miniature Diaphragm Air/Gas Pump

The D3K pumps are miniature diaphragm micropumps designed for maximum performance with minimum power consumption making them especially suitable for portable, battery-powered devices. They are constructure from a special blend of polycarbonate an ABS for maximum strength and rigidity. They are powered by a small and highly efficient coreless DC motor for ultimate efficiency. 

Read more
F2K Impeller Pump 1500 mLPM for Liquids

F2K Impeller Pump 1500 mLPM for Liquids

The F2K is an impeller pump with a stepper motor for up to 1500 mLPM of liquid. Excellent flow control and flow reversal capabilities. Using the EQI-STL controller, the F2K becomes a reliable, consistent dosing pump over a wide range of conditions.

Read more
M200 Series for Liquids 0-700 ml/min

M200 Series for Liquids 0-700 ml/min

The M200 Series are constructed from precision CNC machined aluminum alloy with stainless steel tubing connectors. The M200 range is fitted with Viton seals as standard. Alternative seal materials and optional wetted parts, coatings and materials are also available enabling this pump range to resist most chemicals and solvents. The pump uses efficient push fit connectors designed for 3.2 mm flexible tubing. A 220mm electrical fly-lead is fitted as standard.

Read more
M3000 Series for 54 LPM for Liquids

M3000 Series for 54 LPM for Liquids

The M3000 micropump is a high performing, high quality miniature pump for liquids. It is efficient, small and lightweight. The solid construction and wide temperature tolerance enables it to perform reliably even in hostile environments. The pump utilizes efficient sensorless, brushless motor technology. The pumps reuiqre a separate controller to operate (see the EQ Controllers).

Read more
M410 Series 0-2600 ml/min for Liquids

M410 & M400 Series 0-2600 ml/min for Liquids

The M410 Series range of pumps are driven by a brushless drive motor with built-in electronic controller. Constructed from precision CNC machined aluminum alloy with stainless steel tubing connectors and fitted with Viton seals as standard.

Read more
M510 Series 0-8 LPM for Liquids

M510 Series 0-8 LPM for Liquids

The M510 Series (Brushless Drive, Our Highest Flow Centrifugal Pump) of micropumps is powerful with an efficient long life. It is driven by powerful brushless drive motors and can deliver unparalleled flow for its size. 

Read more
MG2000 Series for 0-2000 ml/min for Liquids

MG2000 Series for 0-2000 ml/min for Liquids

The MG2000 series pumps deliver consistent flow with high or low pressure and can be used with almost any viscosity liquid. They are self-priming. The body is constructed from precision CNC machined aluminum alloy and wetted parts are stainless steel, PEEK, and polyacetal. 

Read more
MGD1000 Series for 0-1100 ml/min for Liquids

MGB800 High Flow & High Pressure Liquid Pump

The MGB800S-PK-V pump delivers consistent flow with high or low pressure. It is suitable for a wide variety of liquids and chemicals. This pumps is self-priming and has a flow rate of 1000 mLPM at 0 psi

Read more
MGD1000 Series for 0-1100 ml/min for Liquids

MGD1000 Series for 0-1100 ml/min for Liquids

The MGD1000 Series micropump delivers consistent pulseless flow with high or low pressure. They are suitable for a wide range of liquids and are self-priming. The MGD1000 can be used with all common liquids and will also resist most chemicals and solvents. 

Read more
MGD3000 Self-Priming Pump up to 3500 mLPM

MGD3000 Self-Priming Pump up to 3500 mLPM

The MGD3000 is a self-priming pump for liquids up to 3500 mLPM. These pumps have a very high pressure capability up to 10 bar (depending on the model) for its size. these pumps include a 3 wire DC sensorless brushless motor. There is an available controller EQI-MG3 for customers to purchase.

Read more
R400 Series of Micropumps for Gas or Liquids

R400 Series of Micropumps for Gas or Liquids

The new 'R' pumps from TCS Micropumps provide you with an unrivalled combination of features and performance that will allow you to leave your competition in the past. Self priming, Valveless, Reversible, Small, Quiet, Robust, capable of pumping both liquids and gases, Good vacuum capability.

Read more
V4000 Vane Micropump for 3700 mLPM for Liquids

V4000 Vane Micropump for 3700 mLPM for Liquids

The V4000 is a vane micropump for liquids up to 3700 mLPM. It is efficient, small, lightweight and self-priming! The pumps accepts a 24V supply and has a high pressure tolerance of 20 bar. The standard pump has Viton seals.

Read more